The print dialog box will reappear. If all three memory locations are occupied, a copy job program can be stored only by overwriting a memory location. The Print dialog box will reappear. Slide the rail under the copier, and then remove it from the right side of the copier. It is not necessary to made any setting for normal use.
Use this screen to view a summery of the network interface card. The settings must match the machine configuration. Center: The watermark is printed at the center of the paper. When Collated is selected, Sorting is dimmed. Advanced: Performs detailed settings of PostScript.
Select the appropriate one according to your needs. It shows the configuration of all the Output Trays installed on the Digital Copier. To prevent absorption of moisture, store paper, which has been removed from its wrapper but not loaded in the drawer, in a sealed plastic bag in a cool, dark place. Setting range: 0 ~ 100 4. Ü Do not subject toner units, imaging drums or other copier supplies to Ü direct sunlight, high temperatures or dampness.
File Name Type in the full path name to the file that contains the setup you want to restore. Use this screen to restore the Network Interface Card to its initial factory default settings. Call the Adjust Mode to the screen. Fully illustrated with exploded views, component and circuit illustrations, complete repair instructions and factory parts list. Either a Multi-staple Finisher or Mailbin Finisher must be mounted to enable setting Punch. It may be damaged if it is dropped. Did you enter an incorrect number? See page 7-50 for more information.
This device must be used with shielded interface cables. Ü Enter the number of copies again. It shows the status of the hard disk installed on the printer controller. Otherwise, some functions may be unusable or printing errors may occur. Print Server Name Input the print server name you want. Information on Installing a Network Printer You can install the printer copier as a local printer or as a network printer.
Remove the Upper Left Cover two screws. After you input the password, the Password box does not appear any more on other Network tab setting screens during the current session. Slide the finisher carefully back to the copier. Pi 3502User Manual Welcome Thank you for purchasing the controller. Carefully pull out any paper jammed there. For more information, see page 6-10.
Preferred File Server Type in the name of the preferred file server when setting up for bindery and bindery emulation. . See Windows 2000 Help for more details. See page 7-52 for more information. Switch on the printer copier. Load a new sheet of copy paper onto the single feed tray. If it doesnt, the printer driver may not function properly.
Select the front cover page function. See page 7-52 for more information. Printed on white paper and features a deluxe comb binding, heavyweight card stock covers and clear plastic protective overleaf. Paper is not fed from the specified paper source. See the following sections of this document for detailed information about each menu.
Place a sheet of white paper of Ü the same size on top of the original. Printer Information Type in a description of the printer. No watermark can be printed in this case. Incomplete Job Queue Section This section lists jobs for which an alternate process was performed or which were removed from the queue because normal print processing was impossible for some reason. See Windows 2000 Help for more details. Not all functions are available! For details, see page 3-26.